News & Press Releases

London, January 20, 2020

China Steel Machinery Company (CSMC), a subsidiary of Taiwanese steel producer China Steel Corporation (CSC) has placed an order with Primetals Technologies to supply staves for CSC´s blast furnace 2 at the company´s Kaohsiung plant. The new staves are part of the third rebuild of blast furnace 2. The aim is to extend the furnace´s lifetime by a further 18 years.

London, January 13, 2020

Jindal Stainless Ltd. issued the final acceptance certificate for the new level-2-process automation on AOD converter #1 to Primetals Technologies in April 2019. The AOD converter was equipped with a level-1-system and brought into operation by a third party in 2010. Jindal Stainless Ltd. subsequently developed its own solution to optimize the implemented level-2-system. This has now been replaced by a new, comprehensive level-2-system from Primetals Technologies that includes a dynamic process model.

London, November 05, 2019

A Chinese steel producer located in Hebei Province has placed an order with Primetals Technologies for the supply of an Arvedi ESP (Endless Strip Production) line. The casting-rolling facility will be part of a new steelmaking facility with one BOF currently under construction. The Arvedi ESP line is capable of rolling strip to a reproducible strip thicknesses down to 0.7 mm. This will enable the company to produce high-quality, ultra-thin strip to enter new market segments.

London, October 09, 2019

Recently, at the production site of Brazilian steel producer ArcelorMittal Monlevade a 130-ton-hot-metal desulfurization station (DeS) and a new dedusting system supplied by Primetals Technologies commenced operation. The desulfurization station represents the first installation of Primetals Technologies combining a volumetric dosing device for Magnesium (Mg) and a pressure dispenser for Calcium Oxide (CaO). Low sulfur levels of lesser than 0,005% (50ppm) can be achieved. The consumption of desulfurization agents is significant reduced and processing times are reduced to less than 30 minutes compared to treatment in a torpedo car.

London, October 07, 2019

Chinese steel producer Zenith Steel Group Co., Ltd. (Zenith Steel) awarded an order to Primetals Technologies to modernize a 10-strand billet caster in its converter steel making plant #3 in Changzhou. The billet caster will be the first one worldwide to be equipped with the new SRD (Single-Roll DynaGap) segments. The SRD segment has been specially developed for use in the area of final solidification, and it enables the upper rolls to be pressed down individually onto the solidifying strand. This enables the final solidification point to be followed precisely.